Learn these methods to clear the ice and snow on the car and prevent

1. It takes skill to clear the ice and snow on the car

The rain and snow brought a lot of trouble to the driver. It's really annoying to get up in the morning to clear the ice on the glass. The correct way is to drive first, use hot air to blow the windshield after the water temperature rises, and then use a glass shovel to scrape away the ice and snow. Never use a wiper as soon as it comes up. Although this method is standard, its disadvantages are time-consuming, labor-intensive and fuel-consuming.

2. How to prevent snow/ice that is difficult to eradicate

The main reason for the icing of car glass is that the temperature inside and outside the car is different. The snow falling on the glass first melts and freezes directly. The snowflakes that fall after freezing are quilt-like snow. After you sweep away the snow on the glass in the morning, the most worrying thing is the ice below. Prevention is of course very simple. First, before locking the car, give a newspaper to the front windshield, which is simple but effective; second, before locking the car, open the door to reduce the temperature inside the car to the same level as the outside of the car, and then use a wiper to wipe off the excess on the windows. The snow, so that the snow falling on the car window will not melt and then freeze.


3. Small actions to prevent the wiper from being frozen

Due to the low night temperature, the wipers often freeze. Before the ice on the windshield melts, do not start the wiper to blow the snow. The drive motor of the wiper may also burn out. The correct approach is to raise the front wiper after locking the car to effectively prevent the wiper from being frozen.

4. It is necessary to warm up the car, do not accelerate in emergency when the water temperature rises