news

Help you easily get a clean and beauty treatment for the vehicle

Update:30-04-2021
Summary:

Carefully cleaning the car is more than just vacuuming […]

Carefully cleaning the car is more than just vacuuming and cleaning. Very small details are also taken care of to make the car look completely new. Start cleaning from the inside of the car. If you clean the exterior of the car first, you may stain the exterior again when you clean the interior. Read on to learn more about how to do it.

Carefully clean the interior of the car

1. Take away the car's foot pads and use a vacuum cleaner to clean the foot pads, floor, compartment, car interior and rear shelf (if any). When cleaning the rear seat, slide the front seat to the frontmost position; when cleaning the front seat, slide it to the rearmost position to thoroughly clean the carpet under the seat.

Start cleaning from top to bottom. The dust or dirt accumulated on the top may fall; the dust or dirt accumulated on the bottom rarely fly upward.
  
2. Dip a damp cloth or sponge with foam cleaner, and then wipe the stains on the carpet or car interior decoration. Dry it with a towel after a few minutes. If the stain does not disappear, you can repeat it several times. After using the cleaner for the last time, wipe it clean with a wet sponge, and be sure to wipe it dry.

Use a absorbent cloth to dry the surface of the car. Excessive humidity may cause mold to grow in the car, which defeats your purpose of cleaning the car.

3. Use a razor blade or scissors to cut off the holes, burned parts and small permanent stains on the carpet. Then cut a small piece from a hidden place, such as the carpet under the seat, to patch it up. Use waterproof adhesive to stick it to the cut hole.

Warning: You can only do this with the owner's consent. If you want, you can show the owner what the repair will look like. As long as the example is done well, the car owner will be very relieved to let you do this.

4. Wash and dry the rubber feet. Apply anti-skid protection agent so that the driver will not slip when making important actions such as braking.

5. Use compressed air and detail brushes to remove dust in small spaces, such as the buttons and gaps between the dashboard and the door.

6. Wipe the hard surface of the car with a mild multi-purpose cleaner. Finally, use polish to maintain the interior parts of the car.

7. Carefully clean the grille of the car vent with a detail brush. If you do not plan to use detergent, make sure that the detail brush you choose should have a super adsorption function like a microfiber cloth, which can adsorb dust efficiently. Gently spray some vinyl protectant onto the vent grilles to make them look like new.

8. Clean the seat. Cleaning the seat is a necessary step, but different seats require different cleaning methods. Note that after cleaning, you may need to vacuum the seat and surroundings again, because some dirt will fall out after the cleaning process.

Upholstery made of cloth: Upholstery made of nylon or other fabrics can be cleaned with a water-absorbing drying vacuum cleaner. After washing, the fabric should be fully dried.
Leather or vinyl upholstery: You can clean the leather upholstery with a leather or vinyl cleaner, and then gently pat dry with a leather brush. Then wipe off the detergent with a microfiber cloth.

0
Views: 583